RV camping
Kohree 8-inch Adjustable Trailer Hitch with Anti-Rattle Clamp
Product description
Dual threaded balls and high towing ratings: This ball mount arrives with both a 2-5/16" ball and a 2" ball installed, rated for up to 12,500 lb GTW on the larger ball and 8,000 lb GTW on the smaller one, letting you switch between heavier travel trailers and lighter utility or boat trailers.
Complete anti-rattle towing kit: The package contains an anti-rattle clamp and four silencer pads to reduce vibration and hitch noise. The pin locks have been upgraded with O-rings and retaining clips to secure the hitch and help prevent moisture and dirt ingress.
Designed for 2" receivers with 8" drop: The ball mount is made for standard 2" receiver tubes and provides an 8-inch drop to help level your tow vehicle to a trailer. That additional drop helps prevent sagging and maintains proper tongue height for safer towing.
Lightweight, corrosion-resistant construction: Forged from a high-strength aluminum alloy, the mount is lighter than comparable steel components while resisting rust, salt, and coastal humidity for lower maintenance and longer life.
Anti-theft locking hardware: Two keyed locking hitch pins and four keys are included; the locking pins use stainless steel components for durability. If you find the hitch pin length interferes with your setup, removing the rubber ring can provide additional usable length.
How to use: Insert the shank into a 2" receiver, secure with the locking pin, select the required ball size for your trailer, tighten the anti-rattle clamp and fit the silencer pads as needed. Use the retaining clips and O-rings on the pin locks to keep everything secure under load.
Customer support: The manufacturer provides customer service and support for product questions and additional RV and trailer accessory options.
Pros
- Dual ball sizes for flexible towing
- Anti-rattle clamp and silencer pads reduce noise
- Corrosion-resistant, lightweight aluminum build
Cons
- Some assembly required
- Small amount of play reported at the adjustable joint
- Pin length may need adjustment for certain setups
VerdictA versatile, corrosion-resistant ball mount that covers two common ball sizes and delivers substantial towing capacity for most medium- to heavy-duty trailer work. The anti-rattle hardware and silencer pads noticeably cut noise and movement; the aluminum construction keeps weight down while resisting rust. A few users reported minor assembly or fit issues with pin length and a little play at the a
Reviews
-
Rick Reiling 5/5
Very satisfied — dependable hitch
Simple and effective. Delivered exactly what I needed and performed reliably.
-
Bruce Erickson 5/5
Well made, takes a little time to put together
The components look great and work well once assembled. The kit was a bit intimidating out of the box, but with some patience and a hand it all came together and performs as expected.
-
- J.B.F 5/5
High quality and tight tolerances
This replaced an older mount that had limited drop and loose joints. The Kohree unit looks and fits better, with tighter tolerances at the receiver and adjustment points. impressed with the machining and overall build.
-
Brule syl 1/5
Too much play in the mount
Very loose fit — a lot of movement in the connection. The hitch has excessive play in the receiver which concerns me for long-term towing.
-
Jason 5/5
Does the job for heavy loads
Pulled a 23 ft trailer and a small excavator without issue. Installation was straightforward and the dual locking pins are a helpful security feature.
-
Jeremiah kross 5/5
Perfect fit on my Tacoma
Installed quickly in my 2" receiver and leveled my trailer without trouble. The adjustable height made swaps between trailers easy and the anti-rattle setup cut the usual clanking. Feels solid under load and the finish seems durable against weather.
-
Shane 5/5
Great value and quiet towing
Well-built and functions as intended. The anti-rattle pieces made a noticeable difference in noise and movement. Easy to adjust and confidence-inspiring when hooked up.
-
JB Texas 1/5
2" ball didn’t mate correctly with my trailer
I bought this expecting to use the 2" ball most often, but I wasn’t able to seat my trailer properly on it. On one job I had to swap to my older ball because the trailer tongue wouldn’t drop on cleanly. Works for some trailers but not all.
-
Julie Vanfossen 4/5
Solid build but note the pin and slop details
The 8" drop model I received appears well made and should last. The shank measures about 1-15/16" square and fits a 2" receiver with minimal play. Both locking pins provide roughly 3-1/2" of usable length between head and lock and came keyed alike. There is a little movement at the adjustable joint, but nothing that crippled towing performance in my initial use.
Comments
No comments yet.
Sign in or sign up to comment.