Amateur radio
Tri‑Band WiFi 6E Antenna (2-Pack) — RP‑SMA Male High‑Gain Set
Product description
What you get: two identical tri‑band WiFi antennas, packaged as a pair for replacing or upgrading existing external antennas. Each antenna supports 2.4 GHz, 5 GHz and the 6 GHz WiFi 6E band and arrives with an RP‑SMA male threaded connector.
Construction and dimensions: the radiation element is housed in a molded plastic casing with a matte finish and a flexible lower stalk. Internally the feed uses plated brass contacts and the outer connector is metal for threaded mounting. Each antenna measures roughly 170 mm (about 6.7 inches) from base to tip and has a slim profile suitable for many consumer and prosumer devices.
Connector details and compatibility: the connector supplied is RP‑SMA male, which has a hollow center (no protruding pin). This is the reverse‑polarity variant of SMA, so be sure your router, adapter, camera, or extender accepts RP‑SMA male threads; otherwise an adapter or different antenna type will be required.
How it's used: these antennas screw onto the external antenna ports of wireless routers, WiFi access points, USB WiFi adapters, mini PCIe/PCIe cards, IP security cameras and DVRs, remote monitoring gateways, and many FPV or video‑receiving systems. They are intended to increase signal reach and stability for streaming, remote viewing and general wireless data transfer. The pair format makes it easy to outfit both ends of a link or to keep a spare on hand.
Pros
- Tri‑band coverage for 2.4 / 5 / 6 GHz WiFi 6E
- RP‑SMA male threaded connector for common devices
- Two antennas included for replacements or paired setups
Cons
- Reverse‑polarity connector may not match all gear
- Build consistency varies — some joints can be loose
- Size can be bulky for compact enclosures
VerdictA capable two‑pack that delivers noticeable range and throughput gains in many setups, especially for outdoor cameras, routers, and small routers. Build quality varies — some units feel very solid, others have loose directional joints — so expect mixed durability. Overall a strong value for boosting WiFi 6E signals when the connector type matches.
Reviews
-
Terrence L Wogan 1/5
Broke and wouldn't stand up
Both antennas failed to remain upright and one broke easily while handling.
-
Victor 5/5
Impressive 5 GHz reach
Surprised at the distance on 5 GHz — over 325 ft with windows, trees and cars in the way and still full bars.
-
Facundo l. 5/5
Works well
They perform nicely in my setup.
-
E. B. 5/5
Outperformed the other so‑called high‑gain models
I used these on a Raspberry Pi wildlife camera and they were the only ones (out of six different 'high‑gain' antennas) that streamed HD reliably. The others dropped or stuttered; this pair held solid video and delivered around 500–600 Mbps from roughly 30 feet.
-
Paulo de souza junior 5/5
Solid product for cameras and DVRs
Great for indoor and outdoor cameras and recorders — arrived quickly and worked perfectly out of the box.
-
Seth 5/5
Huge improvement for my lighting rig
Swapped them onto a wireless lighting transmitter and receiver; range jumped from about 50 ft to nearly three times that with no dropouts. Also extended reach on a mini router to almost half a city block.
-
armen 3/5
Only a slight improvement
They work, but didn't show a meaningful advantage over my router's original antennas.
-
GV 4/5
Too large for my setup
They're massive compared with what I needed — hard to fit into tight spaces.
-
Geovaunie Rolando 2/5
Directional joint is loose
The shaft feels stiff in places but is loose where you need it to hold position, so it won't stay aimed reliably.
Comments
No comments yet.
Sign in or sign up to comment.