3D printing
ELEGOO Mercury XS Wash & Cure Bundle with Handheld UV Light
Product description
The Mercury XS Bundle ships as two separate units: an independent resin washing station and a dedicated resin curing station, allowing simultaneous operation when you have multiple prints to process. This arrangement improves throughput compared with combined wash-and-cure devices.
The curing unit supports a maximum cure envelope of Φ200×260 mm and the package contains a handheld UV wand for spot curing and finishing small details, plus a pair of protective sunglasses to reduce direct eye exposure. The curing chamber is accessed through a transparent cover and is intended to be used for both full-part cures and targeted touch-ups with the wand.
The washing station accepts parts up to 180×121×153 mm when the platform is installed, and up to 201×124×255 mm when the platform is removed. A washable bucket and a removable basket are included to make handling multiple or larger models easier during solvent cleaning.
Operation is straightforward: both stations plug into a provided dual-output power adapter so they can run simultaneously. Each unit uses the same rotary timer control — turn clockwise to increase the run time (maximum 30 minutes) and turn counterclockwise to reduce it. The bundle aims to be a complete post-processing solution by including the wash and cure machines, a washing basket, a handheld UV light, and protective sunglasses. The housings are built from durable molded components with clear covers for visibility while processing prints.
Pros
- Separate wash and cure units for simultaneous use
- Includes handheld UV wand and protective eyewear
- Large wash capacity to clean multiple or taller prints
Cons
- Requires more bench space than a 2‑in‑1 unit
- Be mindful of potential stray UV exposure
- Handheld light cord could be longer and lacks a clip
VerdictThis bundle is a practical upgrade from two-in-one stations: having dedicated washing and curing units speeds up post-processing and lets you handle multiple prints concurrently. The curing chamber accommodates models up to Φ200×260 mm and comes with a handheld UV light and eye protection for detail work. The wash side accepts larger builds (up to 180×121×153 mm with the platform, 201×124×255 mm w
Reviews
-
Gr 5/5
Perfect for Saturn 4 and smaller printers
Solid purchase. Works great for builds up to Saturn 4 size but was too small for my Jupiter 2.
-
E. jimenez Arias 5/5
Essential kit
Great kit, well worth it.
-
Jose Alfonso Velazquez Zamarripa 5/5
Buena opción completa
Buena opción y completa
-
Johnathan Enslin 5/5
Clean results but watch the UV
Cleans parts very effectively. Small pieces can slip through the basket mesh, so I recommend an extra bucket or finer insert. The curing unit is powerful and the UV lamp is bright, but I experienced eye irritation despite the supplied glasses — I discovered some UV escaping from the cooling vents on my unit. The handheld wand’s cord is a bit short and there’s no clip to park it. The timer control took a moment to figure out; tap the top of the black button housing and rotate to set the time.
-
Ashley 5/5
Remember the solvent
Timers take a moment to get used to. Make sure you also purchase enough cleaning solvent—buy enough to fully cover your tallest prints.
-
Joey Walsh 5/5
A worthwhile upgrade from a 2‑in‑1
Bought this to future‑proof for new printers. It uses more space but having separate wash and cure stations is far more convenient. If you have the room, the bundle is an easy yes.
-
Derric Jacobs 5/5
Makes workflow enjoyable again
I’d been using improvised cleaning and curing methods that were slow and messy. This setup sped things up and should reduce how much alcohol I need to buy over time.
-
Fred P. 5/5
Does what it promises
Performs as expected.
-
alisha white 4/5
Quick delivery and follow-up
Arrived quickly and matched the description. The seller checked in to confirm receipt.
Comments
No comments yet.
Sign in or sign up to comment.