Marine

MECMO 50A-to-30A/15A RV Power Y-Adapter (NEMA 14-50P to TT-30R & 5-15R)

MECMO 50A-to-30A/15A RV Power Y-Adapter (NEMA 14-50P to TT-30R & 5-15R)

Product description

What you get: a single molded NEMA 14-50P male plug that splits into two receptacles — one NEMA TT-30R (30A, 120V) and one NEMA 5-15R (15A, 120V). Model number XN1450P-A and ETL listed.

Connector and voltages: the male end is a four-prong NEMA 14-50 rated 50 amp, 125/250 volts suitable for many RV park pedestals, generator outputs and some EV charging outlets adapted for service use. The two female ends accept a 30-amp travel trailer plug and a standard household three-prong plug respectively.

Construction and wire: the cord uses UL 62 Standard STW 10AWG x3 conductors with individual insulation and a durable, weather-resistant PVC outer jacket. The molded ends protect the connection points and the inner wires are sized for heavy-duty campground and generator use.

Capacity and usage notes: while the adapter provides access to the 50A inlet, each output is limited to a maximum safe loading of 30 amps. It is intended to let a TT-30-equipped RV run higher-draw appliances from a 50A source and also power an additional 110V device. This is not a load-balancing device; users should monitor combined draw to avoid tripping breakers.

Where to use: ideal for small and mid-size RVs, travel trailers and campers that need to tap a 50A pedestal for a TT-30 plug and a household device. Suitable for outdoor campsite connections and temporary use with compatible generators.

Pros

  • Converts 50A inlet to 30A and 15A outlets
  • Heavy 10AWG STW wiring with PVC jacket
  • ETL listed, molded strain-relief ends

Cons

  • Does not balance load between outputs
  • Female ends lack protective caps
  • Both outlets draw from the same 50A source

VerdictA practical Y-adapter for RV owners who need to tap a 50A supply for a 30A travel trailer plus a standard 110V device. Constructed with 10AWG STW wiring and a rugged PVC jacket, it’s ETL-marked and made for indoor/outdoor use. It won’t balance loads between outputs, so monitor draw limits (each output rated to 30A max) and avoid overloading. Good durability and broad compatibility make it a useful

Reviews

  1. benjamin wallace 5/5

    Added capacity for heavier loads

    Solved our power gap by giving about 20 extra amps to the 30A camper. Handy for running a space heater and my son's gaming PC.

  2. Paul Alexander 5/5

    Solid unit

    A dependable product.

  3. K.Miller 5/5

    Great for trailers

    Very useful for campers and small trailers — no complaints.

  4. Bear 5/5

    Simple and effective

    Perfectly functional!

  5. Sabrina Swinney 5/5

    Works for family RV

    Bought this for my mother-in-law's camper and it functions flawlessly for her setup.

  6. Lisa Becker Taylor 5/5

    Does the job

    No issues so far — performs as intended and we're glad to have it on trips.

  7. picjas0913 5/5

    Performs as advertised

    Connects and powers devices as expected; matches the product description.

  8. Blanca Padilla 5/5

    Still reliable after months

    Picked this up for my RV nearly a year ago and it continues to work without problems. Shows normal wear but no failures and has handled multiple camping seasons.

  9. Stephane Alarie 5/5

    Works well and arrived on time

    Functioned perfectly out of the box and delivery met the expected date.

  10. Dave Williams 5/5

    Saved our trip

    When half of the campground circuit went out, this adapter let us keep 15A power running so we didn't lose the weekend.

  11. Trust Me 4/5

    Handy camping accessory

    Useful and performs as expected.

  12. Thirdeyedeasinc 4/5

    Well made but missing caps

    Exactly as described and solidly built. The male plug came with a plastic prong cover, which was nice. I wish the two female receptacles had protective caps to prevent accidental contact when not in use.

Comments

No comments yet.

Sign in or sign up to comment.

  1. Outboard Engine Kill Switch Lanyard for Mercury/Tohatsu Motors
    Marine

    Outboard Engine Kill Switch Lanyard for Mercury/Tohatsu Motors

    4.9 8 reviews Compact outboard kill switch lanyard designed for small engines. Braided nylon cord with ABS housing and aluminum alloy fittings. Tool-free mounting to throttle or tiller handles, stops the engine when the lanyard is pulled and is compatible with many small petrol engines and personal watercraft.
  2. FSC-Certified 2-Ply Quick-Dissolve Toilet Paper for RVs & Marine — 24 Rolls
    Marine

    FSC-Certified 2-Ply Quick-Dissolve Toilet Paper for RVs & Marine — 24 Rolls

    4.9 7 reviews Bulk pack of 24 quick-dissolving, 2-ply toilet paper rolls (300 sheets per roll, 4 x 4-inch cores) made from virgin fiber with a quilted texture. Designed to break down reliably in RV and marine waste systems while remaining soft and absorbent for everyday use.
  3. Low-Back Folding Marine Boat Seats — 2-Pack Deluxe
    Marine

    Low-Back Folding Marine Boat Seats — 2-Pack Deluxe

    5.0 4 reviews Two low-back folding boat seats designed for anglers and recreational boaters. Thick high-density foam, marine-grade vinyl, rust-resistant aluminum hinges, removable corner pads, 250 lb capacity and standard 5x5 mount.
  4. Adjustable Laundry Pedestal Stand — 29" Mini Fridge/Washer Base
    Marine

    Adjustable Laundry Pedestal Stand — 29" Mini Fridge/Washer Base

    4.6 8 reviews A heavy-duty adjustable pedestal designed to raise washers, dryers and compact refrigerators. The frame fits appliance footprints from about 21" to 29", offers 4.1–5.1" of lift, and uses 16 steel-supported feet to bear up to 400 lb while reducing vibration. Includes assembly instructions and is comp
  5. BOSS MCKGB450B.6 Marine Gauge Stereo with 6.5-Inch Speakers (Pair)
    Marine

    BOSS MCKGB450B.6 Marine Gauge Stereo with 6.5-Inch Speakers (Pair)

    4.4 13 reviews Compact marine head unit bundled with a pair of 6.5" weatherproof speakers. Bluetooth streaming, USB/AUX inputs, AM/FM and NOAA reception, IPX6-rated receiver, and front/rear/sub outputs for multi-speaker setups.
  6. Johnson 32903 Bilge Pump Cartridge with Dura-Port — 1000 GPH
    Marine

    Johnson 32903 Bilge Pump Cartridge with Dura-Port — 1000 GPH

    4.8 12 reviews A 1000 GPH cartridge-style bilge pump cartridge in black featuring a Dura-Port outlet. Sold as a replaceable cartridge assembly, it fits universal housings and is built for routine bilge duties aboard small to medium craft.
  7. Emergency Marine Throwable Foam Cushion — Boat Flotation Seat
    Marine

    Emergency Marine Throwable Foam Cushion — Boat Flotation Seat

    4.9 8 reviews USCG-approved Type IV throwable flotation cushion that doubles as an extra boat seat. Constructed with a 200D polyester cover, polypropylene grab strap and 7mm EPE foam in 10 layers. Lightweight, durable, highly visible and suitable for aluminum boats, kayaks, pontoons, canoes, docks and pools.
  8. Paul Rubens Squirrel-Hair Watercolor Mop Brush — Size 4 Round
    Marine

    Paul Rubens Squirrel-Hair Watercolor Mop Brush — Size 4 Round

    4.7 11 reviews A hand-shaped squirrel-hair wash/mop brush built to carry a lot of water and pigment for sweeping washes and controlled strokes. Features a metal ferrule, glazed handle, and elegant black gift box; intended for watercolor, gouache, acrylic and oil techniques.
  9. 1200 lb Swing-Back Trailer Tongue Jack with 6" Wheel
    Marine

    1200 lb Swing-Back Trailer Tongue Jack with 6" Wheel

    4.4 8 reviews A heavy-duty swing-back trailer tongue jack rated for 1200 lbs with a 6-inch nylon wheel, 10-inch travel and 12.8"–22.8" adjustable height. Galvanized, powder-coated steel construction, detachable handle, and a swivel, lockable bracket for horizontal or vertical transport. Includes basic mounting ha
  10. CARVALAX 45° Eccentric Flaring Tool Kit — Imperial Clamp 3/16"–3/4"
    Marine

    CARVALAX 45° Eccentric Flaring Tool Kit — Imperial Clamp 3/16"–3/4"

    4.4 7 reviews A seven-size imperial flaring kit that makes 45° eccentric flares in soft metals. Forged body, hardened steel cone, ergonomic handle and single clamp screw. Supplied in a molded case for HVAC, refrigeration and plumbing use.