Welding

UD65 Light-Duty Utility Clamp — 6.5" Capacity, Quick-Action F-Clamp

4.9 12 reviews 1 min read

UD65 Light-Duty Utility Clamp — 6.5" Capacity, Quick-Action F-Clamp

Product description

This single UD65 utility clamp ships as one quick-action F-clamp, ready for immediate use in workshop and fabrication tasks.

Built for shop use, the clamp provides a 6-1/2" maximum opening and a 3-1/4" throat depth to reach into tighter work areas. The tool is rated to exert roughly 500 lb of clamping pressure and rides on a 5/8" x 5/16" rail. A 5/16-18 tapped hole in the body accepts accessories or custom attachments.

Designed to speed setup, its quick-slide mechanism and key-ring stop let you position and lock much faster than traditional C-clamps. Rugged construction and welded joints give it the durability expected in welding and metalwork environments; it’s operated with a squeezing motion and can be used while wearing gloves.

Pros

  • Fast one-motion setup and release
  • Solid holding force for light-duty tasks
  • Accessory-ready 5/16-18 tapped hole

Cons

  • Not optimized for single-handed fine adjustment
  • Limited to 6.5" capacity and 3-1/4" throat
  • May be overkill for very light hobby work

VerdictA sturdy, quick-adjusting utility clamp that delivers reliable holding power and faster setup than conventional C-clamps. With a 6.5" capacity, 3-1/4" throat depth and a 5/16-18 tapped hole, it suits welding, woodworking, and general shop work. Not ideally a one-handed tool, but it works with gloves and offers a useful balance of reach and force.

Reviews

  1. jacetheace 5/5

    Reliable grip

    Holds tight and works well.

  2. JustAnotherName12 4/5

    Helpful for hobby welding

    As a hobby welder with a folding table, magnet mounts were mediocre; this clamp holds far better. Not ideal for one-handed use, but usable with welding gloves. I'll buy more, including larger sizes.

  3. John PJ 5/5

    Well made and roomy

    Well built, good jaw opening.

  4. Janet L Scott 5/5

    Handy small clamps

    Great compact clamps for small projects. Strong grip — a must-have for welders.

  5. Andrea 5/5

    Very useful for wood joins

    They provide strong grip when joining wood.

  6. Khaki 5/5

    Does the job, a bit pricey

    A bit pricey but performs reliably. Saves you from needing another pair of hands.

  7. Medina 5/5

    Excellent quick clamp

    Excellent quick-action clamp; quite strong for metal and hardly slips.

  8. John Thyssen 5/5

    Worth it for welders

    I'm a welder — these clamps are worth the expense.

  9. km 5/5

    Right size for smaller jobs

    Perfect size compared with a bulky 12–14" clamp; this handles up to about 5.5" and offers a deeper throat than many C-clamps.

  10. AzIronman 5/5

    Quick to set and versatile

    These slide together quickly and tighten fast. I've used other brands; these are the quickest. Bought 6" and 8" sizes — the throat depth is the same, so the larger size covers smaller work. The threaded hole is handy for accessories or custom fixtures.

  11. kamac 5/5

    Great for tight spots

    Needed clamps for tight spots; these fit where others won't. Affordable and convenient, though I haven't stressed them heavily.

  12. PETER COONEY 5/5

    Good tool, annoying price change

    I liked the clamp's feel, welds, and clamping force and planned to buy more. Then the price jumped significantly within days, so I decided not to stock up — they lost some of their value appeal.

Comments

No comments yet.

Sign in or sign up to comment.

  1. GVS Elipse SPR657 Low-Profile Respirator (M/L) with Replaceable Filters
    Welding

    GVS Elipse SPR657 Low-Profile Respirator (M/L) with Replaceable Filters

    4.7 9 reviews A compact, M/L low-profile respirator from GVS designed to filter organic gases, vapors and particulates. Lightweight and hypoallergenic, it offers a wide field of view, replaceable filters with up to a three-year service life, and a molded elastomer facepiece that won’t interfere with goggles or ea
  2. MAGID SparkGuard 9 oz Cotton Sateen Flame-Resistant Cape Sleeves (Pair)
    Welding

    MAGID SparkGuard 9 oz Cotton Sateen Flame-Resistant Cape Sleeves (Pair)

    4.8 8 reviews A green, 9 oz. 100% cotton sateen cape sleeve pair that meets ASTM D6413 for flame resistance. Long collared design with adjustable wrist snaps and six bib snaps provides upper-body and neck protection. Lightweight, breathable coverage meant to be worn alone or attached to a bib and layered over glo
  3. VASTOOLS MIG Welding Accessory Kit — 8-Piece Welder Tools
    Welding

    VASTOOLS MIG Welding Accessory Kit — 8-Piece Welder Tools

    4.8 8 reviews An eight-piece MIG welding accessory kit with gloves, chipping hammer, magnets, pliers, nozzle reamer, soapstone holders and wire brush. Designed for slag removal, nozzle cleaning, tacking at fixed angles and marking metal.
  4. 9-Inch Metal Cut-Off Wheels — 9 x 3/32 x 7/8 in, 10-Pack
    Welding

    9-Inch Metal Cut-Off Wheels — 9 x 3/32 x 7/8 in, 10-Pack

    4.9 8 reviews Ten 9-inch flat metal cut-off discs (Type 1/41) sized 9 x 3/32 x 7/8 inches. Aluminum oxide abrasive with dual fiberglass reinforcement, rated to 6,650 RPM, made for angle grinders and hand-held cutting of steel, stainless, cast iron and sheet metal. Thin profile for faster cuts, reduced burr, and a
  5. BASE CAMP Silver/Black Reusable Dust Mask (M Plus) with 6 Filters
    Welding

    BASE CAMP Silver/Black Reusable Dust Mask (M Plus) with 6 Filters

    4.4 11 reviews A striking silver reusable respirator that pairs a multi-layer activated carbon filter system with enlarged one-way valves and an adjustable elastic/hook-and-loop headband. Constructed from nylon and melt-blown layers, the M Plus mask is designed for woodworking, construction and general dust protec
  6. Flat Soapstone Holder Refill Kit — 12-Piece Welding Markers
    Welding

    Flat Soapstone Holder Refill Kit — 12-Piece Welding Markers

    4.7 11 reviews A 12-piece marking kit that includes two flat holders preloaded with soapstone chalk plus ten flat soapstone refills. Uses #1 grade soapstone for bright white, removable lines that stand up to welding heat. Holders are stainless steel with a copper buckle for comfort and durability. Ideal for weldin
  7. AGK320 Hole Plug Magnet — Hands-Free Welding Backer with Copper Pad (5.5")
    Welding

    AGK320 Hole Plug Magnet — Hands-Free Welding Backer with Copper Pad (5.5")

    4.9 9 reviews A compact hands-free backer for hole welding that mounts to curved steel. The pivoting magnetic V-pad secures to panels while a spring-loaded arm holds a thick copper pad in place. The long arm keeps the magnet away from heat and the copper backing dissipates heat and resists sticking, producing cle
  8. 3-Panel 6 x 6 ft Mobile Welding Screen with Frame and 12 Swivel Casters
    Welding

    3-Panel 6 x 6 ft Mobile Welding Screen with Frame and 12 Swivel Casters

    4.0 8 reviews A three-panel, 6' x 6' welding screen built from flame-resistant vinyl with six-level UV shielding. Ships with a metal frame, metal grommets and 12 swivel casters (six lockable) for easy positioning. Designed to block sparks, splatter and UV flash while allowing you to isolate a work area and move t
  9. Spiral Pressed Penny Album — 224-Coin Archival Notebook
    Coins

    Spiral Pressed Penny Album — 224-Coin Archival Notebook

    5.0 8 reviews A spiral-bound pressed penny album that holds 224 souvenir coins in clear protective pockets. Opens flat for easy viewing, uses archival-grade materials, is lightweight for travel, and arrives with a surprise souvenir penny. Made by a small U.S. family business.
  10. Ansen Hardwired Under-Cabinet LED Lighting — 12in Dimmable (4-Pack)
    Lighting

    Ansen Hardwired Under-Cabinet LED Lighting — 12in Dimmable (4-Pack)

    4.9 9 reviews Four 12-inch hardwired LED fixtures with aluminum-alloy and plastic housings. Each lamp is 10W and ~666 lm at 120V, offers five CCT settings from 2700K–5000K, UGR92 anti-glare optics, and R9>90 color rendering. Fixtures include a local on/off switch, 100–5% dimming compatibility with most LED dimmer